2006 Arctic Cat ATVs factory service and repair manual, Page 116Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 116

16Place the tab washer onto the sprocket making sure it covers the pin in the alignment hole 18 Rotate the crankshaft until
damage will result 17Apply red Loctite #271 to the first cap screw securing the sprocket and tab washer to the camshaft;
then install the cap screwTighten cap screw only until snug 19Rotate the crankshaft until the first cap screw securing the
sprocket to the camshaft (from step 17) can be addressed; then install the cap screwTighten to specifications; then bend
the tab to secure the cap screw 20Install the cylinder head plug in the cylinder head with the open end facing the camshaft21Remove