2006 Arctic Cat ATVs factory service and repair manual, Page 126Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 126

3Loosen the cap screw on the end of the cam chain tensioner; then remove the two Allen-head screws securing the cam chain
be taken not to drop the C-ring down into the crankcase 5Bend the washer tabs and remove the two cap screws securing the
sprocket to the camshaft 7Noting the timing marks for installing purposes, drop the sprocket off the camshaftWhile holding
the cam chain, slide the sprocket and camshaft out of the cylinder headAccount for an alignment pin1NOTE: Loop the chain