2006 Arctic Cat ATVs factory service and repair manual, Page 139Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 139

Table of Contents (Servicing Components) 1 NOTE: Critical enginetransmission specificstions are located at the beginning
Do not remove an excessive amount of the sealing surface or damage to the camshaft will resultAlways check camshaft clearance
when resurfacing the valve cover Servicing Top-Side Components 1 NOTE: Whenever part is worn excessively, cracked, or damaged
in any way, replacement is necessary Water or parts-cleaning solvent must be used in conjunction with the wet-or-dry sandpaper
or dam- VALVE ASSEMBLY Removing Valves 1 NOTE: Keep all valves and valve components as setNote the original location of each
valve set for use during installationReturn each valve set to its original location during installation When servicing valve
assembly, inspect valve seats, valve stems, valve faces, and valve stem ends for pits, bum marks, or other signs of abnormal
wear1 NOTE: Whenever valve is out of tolerance, it must be replaced CleaningInspecting Valve Cover 1 NOTE: If the valve cover