2006 Arctic Cat ATVs factory service and repair manual, Page 152Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 152

INSPECTING OIL PUMP Servicing Right-Side Components 1 NOTE: Whenever part is worn excessively, cracked, damaged in any way,
clutch shoe groove ATVI 014 1Secure Driven Pulley Compressor (pln 0444-140) in suitable holding fixture such as bench vise;
then remove the wing nut, holding handle, flat washer, and pilot bushing leaving the large spacer on the compressor tool
base INSPECTING CENTRIFUGAL CLUTCH HOUSING 1Inspect the clutch housing for bums, marks, scuffs, cracks, scratches, or uneven
wear 2If the housing is damaged in any way, the housing must be replacedINSPECTING PRIMARY ONE-WAY DRIVE 1Insert the drive
into the clutch housing2Rotate the inner race by hand and verify the inner race rotates only one direction3If the inner race
is locked in place or rotates both directions, the drive assembly must be replaced Place the driven pulley assembly onto