2006 Arctic Cat ATVs factory service and repair manual, Page 153Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 153

3Install the pilot bushing with the machined end directed down; then fit the bushing into the pulley hub The spring assembly
wing nut counterclockwise to relax the spring1 NOTE: There will be tendency for the handle to rotate clockwise approximately
turn as the spring holder clears the flats or hubThis is due to slight counterclockwise preload on the spring 5Place the
holding handle on the spring holder fitting the two dowel pins into the spring holder face; then install flat washer and