2006 Arctic Cat ATVs factory service and repair manual, Page 159Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 159

Measuring Crankshaft (Web-to-Web) Assembling 1Using calipers, measure the distance from the outside edge of one web to the
then secure with the circlipPlace the washer next to the circlip3Place the low driven gear onto the countershaft making sure
the bearing and bushing are properly positioned; then place the washer onto the shaft Disassembling 1Remove the reverse driven
gear dog; then remove the circlip securing the reverse driven gear2Remove the reverse driven gear and account for the washer,
bushing, and bearing 4Place the reverse driven gear onto the countershaft making sure the bearing, bushing, and washer are
properly positioned; then secure with the circlip5Place the reverse driven gear dog onto the countershaft; then secure with
the circlip1 NOTE: The countershaft is now completely assembled for installation 3Remove the low driven gear washer; then
remove the low driven gearAccount for the bushing and bearing4Remove the washer; then remove the circlip securing the sliding