2006 Arctic Cat ATVs factory service and repair manual, Page 163Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 163

Installing Right-Side Components AOil StrainerIOil Pump 1Place the oil strainer and new O-ring into position beneath the
occurs 2Noting the directional arrow from removing, place the strainer cover into position on the crankcase making sure the
O-ring is properly installed and secure with the four cap screws; then tighten the oil drain plug to specifications 6In crisscrosscase-to-case
pattern, tighten the mm cap screws to specificationsINOTE: Rotate the shafts back and forth to ensure no binding or sticking
occurs B AT THIS POINT After completing center crankcase components, proceed to Installing Right-Side Components, to Installing
Left-Side Components, and to Installina Toe-Side Comeonents 3Place two alignment pins and the oil pump into position on the