2006 Arctic Cat ATVs factory service and repair manual, Page 164Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 164

4Place the pin into position on the oil pump shaft, install the oil pump driven gear making sure the recessed side of the
nut; it has "left-hand" threads 8Install the one-way sprag clutch making sure that the green dot or the stamp tag OUTSIDE
is directed away from the crankcase 5Install the cam chain1 NOTE: Keep tension on the cam chain to avoid damaging the crankcase
boss 6Place the pin into position, install the oil pump drive gear, and tighten the cap screw (coated with red Loctite #271)
securely9Install gear position indicator switch contact pins and springs into the end of the shift shaft Page: 164 Arctic