2006 Arctic Cat ATVs factory service and repair manual, Page 179Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 179

13Secure the carburetor assembly up and away from the engine 17Remove the two coolant hoses from the engine; then route the
the rear output joint flange 15Remove the springs securing the muffler to the exhaust pipe; then remove the mufflerAccount
for the two exhaust springs 1 NOTE: It is advisable to lock the brake when loosening the cap screws securing the rear driveshaft
19Remove the positive cable from the starter motor and route it out of the way 16Remove the two cap screws securing the exhaust