2006 Arctic Cat ATVs factory service and repair manual, Page 199Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 199

1 NOTE: Repeat procedure on the remaining intake valve seat 2Insert each valve into its original valve location Lapping Valves
to the head of the valve Towards 4Rotate the valve until the valve and seat are evenly polished 5Clean all compound residue
from the valve and seatMeasuring Rocker Arm (Inside Diameter) 1Using dial calipers, measure the inside diameter of the rocker
arm 4Place spring retainer over the valve springs; then using the valve spring compressor, compress the valve springs and
install the valve cotters 2Acceptable inside diameter range must be within specificationsMeasuring Rocker Arm Shaft (Outside
Diameter) 1Using micrometer, measure the outside diameter of the rocker arm shaft2Acceptable outside diameter range must