2006 Arctic Cat ATVs factory service and repair manual, Page 202Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 202

A CAUTION Incorrect installation of the piston rings will result in enaine damaae Measuring Cylinder Head Distortion 1Remove
the cylinder head in figure eight motionInspect the sealing surface for any indication of high spotsA high spot can be noted
by bright metallic finishCorrect any high spots before assembly by continuing to move the cylinder head in figure eight motion
until uniform bright metallic finish is attained 1Wash the cylinder in parts-cleaning solvent 2Inspect the cylinder for pitting,
scoring, scuffing, warpage, and corrosionIf marks are found, repair the surface using cylinder hone (see Honing Cylinder
in this sub-section)3Place the cylinder on the surface plate covered with #400 grit wet-or-dry sandpaperUsing light pressure,
move the cylinder in figure eight motionInspect the sealing surface for any indication of high spotsA high spot can be noted
by bright metallic finishCorrect any high spots before assembly by continuing to move the cylinder in figure eight motion