2006 Arctic Cat ATVs factory service and repair manual, Page 207Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 207

1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting lug in the case;
of the reelApply low-temperature grease to the spring and hubThread the end of the rope through the guide hole of the case;
then thread the rope through the handle and secure it with double knotInstall the protective cover into the handleAlign the
inner hook of the spiral spring with the notch in the reel8Install the friction plate with the ratchet guide fitting into