2006 Arctic Cat ATVs factory service and repair manual, Page 211Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 211

1 NOTE: Make sure the spacer is on the base or damage to the fixed face will occur when the spring is compressed CD056 Inspecting
the four pins and spacers into the fixed face hub; then pack the cam slots in the movable face with multi-purpose grease
4 Inspect the pins and bushings for wear, flat spots, looseness, or cracking Assembling 1Place the fixed face of the driven
pulley on the pulley compressor base making sure the dowel pins are engaged in the appropriate holes in the pulley face3-168