2006 Arctic Cat ATVs factory service and repair manual, Page 216Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 216

Assembling CEY WasherDrive Gear (R) 2Drive Gear #2 3Circlip 4Reverse Gear Dog 5Spacer 6Washer 7Bushing 8Bearing 9Reverse
sure the bearing? bushing, and washer are properly positioned; then secure with the circlip5Place the reverse gear dog onto
the countershaft; then secure with the circlip W NOTE: The beveled side of the secondary drive gear must face upward 6Place
drive gear #2 onto the countershaftH NOTE: When installing the countershaft assembly, account for the washer on each end
of the shaft 2Apply red Loctite #271 to the threads of the output shaft; then secure with the nutTighten nut to specifications;
then using punch? peen the nut Assembling Crankcase Half 1Install the output shaft assembly into the crankcase making sure
the two gears, shim? washer, and nut are properly sequenced 3Apply liberal amount of engine oil to the crankshaft bearingUsing