2006 Arctic Cat ATVs factory service and repair manual, Page 218Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 218

9Insert the two shift forks into the sliding dogs noting the direction of the tabs from disassembling; then install the shift
10Install the reverse idler gear assembly noting the positioning of the two washers, gear, bushing, and shaft Joining Crankcase
Halves 11Install the front and rear secondary driven shaft assemblies into the left side of the crankcase making sure the
bearing locating pins are facing upward and the bearing C-ring is fully seated in the crankcase 1Apply High-Temp Sealant