2006 Arctic Cat ATVs factory service and repair manual, Page 221Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 221

1NOTE: When installed correctly, the sides of the drive and driven gears will be flush with each other Install the clutch
to specifications.1 Care must be taken that the directional washer be installed correctly and note that the nut has left-hand
threads 7Lightly grease the clutch housing seal; then insert the left fixed drive spacerWhen installed correctly, the green
alignment dot (or the word OUTSIDE) on the one-way clutch DOES NOT SHOW 11Place the clutch coverclutch housing assembly into
position on the crankcase; then secure with the cap screws making sure the different-lengthed cap screws are in their proper
locationTighten to specifications12Place the air intake plate cushion into position; then install the air intake plateTighten