2006 Arctic Cat ATVs factory service and repair manual, Page 229Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 229

18Rotate the crankshaft until the second cap screw securing the sprocket to the camshaft can be installed; then install the
tighten to specificationsBend the tab to secure the cap screw 22Remove the cap screw from the end of the chain tensioner;
then using flat-blade screwdriver, rotate the adjuster screw inside the tensioner clockwise until the screw bottoms 20Place
the C-ring into position in its groove in the cylinder headI 1NOTE: The adjuster shaft will be drawn into the tensioner as
the adjuster screw is rotated clockwiseThe adjuster shaft tension will be released in step 24 23Place the chain tensioner