2006 Arctic Cat ATVs factory service and repair manual, Page 230Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 230

24Using flat-blade screwdriver, rotate the adjuster screw inside the tensioner counterclockwise until all tension is released;
arms and adjuster screws must not have pressure on them 28Install the four top side cap screws with rubber washers; then
install the remaining cap screwsTighten only until snug 25Loosen the four adjuster screw jam nuts; then loosen the four adjuster
screws on the rocker arms in the valve cover 29In crisscross pattern starting from the center and working outward, tighten