2006 Arctic Cat ATVs factory service and repair manual, Page 236Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 236

8Remove the vacuum hose fuel-pump-to-carburetor hose and 9Remove the cap screws securing the left-side foot peg and footwell
the transmission 10Remove the springs securing the muffler to the exhaust pipe; then remove the mufflerAccount for two exhaust
springsCD805 15Loosen the clamp securing the air intake duct to the air filter housing 11Remove the cap screws securing the
exhaust pipe to the head; then remove the exhaust pipe16Disconnect the crankcase vent hose from the air filter housingLoosen