2006 Arctic Cat ATVs factory service and repair manual, Page 270Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 270

MEASURING SHIFT FORK (Thickness) NOTE: Whenever shift fork is out of tolerance, replacement is necessary 1Using calipers,
Prior to inspecting and measuring components, it is recommended that all components be removed from the primary gear assembly
and be cleanedH NOTE: When removing components from the primary gear assembly, account for the bushing that fits into the
primary gear 2Shift fork groove width must be within specificationsMEASURING SHIFT FORK TO GROOVE (Side Clearance) 1In turn,
insert each shift fork into its groove 2Using feeler gauge, measure the clearance between the shift fork and the groove InspectingMeasuring