2006 Arctic Cat ATVs factory service and repair manual, Page 271Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 271

2In turn place each driven plate on the surface plate; then using feeler gauge, measure warpage in several locations 2Inspect
housing2Rotate the inner race by hand andthe inner race rotates only one directionb - 2Drive plate thickness must be within
minimum specifications3 If the fiber plate tabs are damaged? the plate must be replaced 3If the inner race is locked in place
or rotates both directions, the drive assembly must be replacedAssembling Primary Clutch KEY Pressure Disc 2Driven Plate
4Inspect the clutch sleeve hub for grooves or notchesIf grooves or notches are present? replace the hublnspecting Centrifugal
Clutch Shoe 1Inspect the clutch shoe for uneven wear, chips, cracks, or discoloration Drive Plate Sleeve Hub Primary Gear
Assy Washer Washer 1Place the clutch hub upside down into the primary gear assembly3-228 Page: 271 Arctic Cat ATV 2006 -All