2006 Arctic Cat ATVs factory service and repair manual, Page 287Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 287

crankcase halves, turn the shift cam to ensure all gears shift properly 1 NOTE: Prior to joining 4From the right side, install
then tighten only until snug1 NOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 2Using plastic
mallet, lightly tap the case halves together until cap screws can be installed 3From the left side, install the three case
half mm cap screws (two inside the case); then tighten only until snug1 NOTE: Rotate the shafts back and forth to ensure
no binding or sticking occurs 6From the right side, install the five case half mm cap screws (one inside the case); then