2006 Arctic Cat ATVs factory service and repair manual, Page 301Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 301

14Seat the cam sprocket onto the camshaft making sure the alignment pin in the camshaft aligns with the smallest hole in
hole (smallest) are aligned17Rotate the crankshaft until the second cap screw securing the sprocket to the camshaft can be
installed; then install the cap screw (threads coated with red Loctite #271) and tighten to specificationsBend the tab to
secure the cap screw If any of the above factors are not as stated, go back to step 11 and carefully proceed 15Place the
tab-washer onto the sprocket making sure it covers the pin in the alignment hole 18Rotate the crankshaft until the first
cap screw (from step 16) securing the sprocket to the camshaft can be addressed; then tighten to specificationsBend the tab