2006 Arctic Cat ATVs factory service and repair manual, Page 312Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 312

24Remove the engineltransmission assembly from the left side of the frame1 NOTE: Tape over or cap all open hoses, lines,
three clutch cover bolts (B) noting the arrow (D) and attach the clutch holding tool (A) 1 NOTE: The engineltransmission
does not have to be removed from the frame for this procedure Removing Left-Side Components Recoil Starter Water Pump Cover
RotorFlywheel Stator Starter Torque Limiter Starter ClutchClutch Gear Oil Pump Remove the four cap screws securing the recoil
starter assembly to the left-side cover; then remove the recoil starterAccount for the gasketDrain the cooling system including
the coolant reserve tank; then remove the coolant hoses (A), four cap screws (B), and the water pump cover (C)Account for
the gasket 5Hold the clutch stationary while (from the opposite side) loosening the rotorlflywheel cap screw (A); then remove