2006 Arctic Cat ATVs factory service and repair manual, Page 317Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 317

3Remove the cap screws (A); then remove the cam chain tensioner (B)Repeat for the second cylinder 5If the left-side components
case to the head; then remove the rear rocker case (B) NOTE: Leave the camshaft and camshaft chain installed until the rear
rocker case is removed or the cam chain will have to be supported while rotating the crankshaft1 NOTE: If the left-side components
have been removed, align the keyway (A) in the crankshaft with the embossed line (C) on the crankcase 7Remove the front camshaft
and support the camCAUTION Do not rotate the crankshaft without keeping tension on the camshaft chains or engine damage could