2006 Arctic Cat ATVs factory service and repair manual, Page 318Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 318

9Remove the front cylinder head assembly and account for two alignment pins (A), cylinder head gasket (B), oil pipe (C),
tensioner (A); then remove the circlip (B) and washer11Remove the intermediate shaft chain guides (C); then remove the two
Allen-head cap screws (D)Account for the intermediate cam drive position plate 13Hold the intermediate shaft (A) with an
Allen wrench 14Remove the intermediate shaft sprocket nut (A); then remove the sprocket (B), drive chain (C), and the rear