2006 Arctic Cat ATVs factory service and repair manual, Page 337Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 337

7Remove the spacers; then thoroughly clean all parts in high flash-point solventInspecting 4Inspect the pins, bushings, and
fixed face making sure the alignment marks are properly aligned and the spacers are in position 2Install the four pins into
the fixed face hub; then pack the cam slots in the movable face with multi-purpose grease1NOTE: Installation of the pins
can be simplified by applying multi-purpose grease on the blade of screwdriver, placing the pin onto the grease, and installing