2006 Arctic Cat ATVs factory service and repair manual, Page 347Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 347

15Install reverse idler (C); then install the reverse drive gear (A) and spacer (B) 17Make sure that the crankshaft, transmission
FBacklash (Adjusting) GTooth Contact (Adjusting) HCamshaft Drive Chains (Installing) IIntermediate Shaft 16Apply molybdenum
disulfide oil to the shift shaft (A); then install the shift spring (C) and guide (D)Apply red Loctite #271 to the shift
shaft spring bolt (B) and tighten to specifications 1Awwlv Three Bond Sealant (win 0636-070) to the mating surface of the
leftcrankcase half (A) being careful to keep sealant out of the oil passage (B); then join the crankcase halves Page: 347