2006 Arctic Cat ATVs factory service and repair manual, Page 349Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 349

8Press the drive bevel gear in until it bottoms; then apply blue Loctite #242 to the threads (A) of the bevel gear retainer
output shaft holding fixture (B) and spacer (C) in vise; then hold the housing assembly (A) and install the output shaft
(D) in the housing13Apply blue Loctite #242 to the threads of the output shaft retainer nut (E) and with the protruding side
(F) directed away from the bearing, tighten to specifications Using the bearing driver (A), drive the bearing into the output