2006 Arctic Cat ATVs factory service and repair manual, Page 359Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 359

3Apply clean engine oil to the piston skirts and cylinder walls; then install the cylinders and clamp (A) (rear only) and
then engage the rear camshaft sprocket with the chain aligning the index marks (B) with the cylinder head upper surface 5Install
the cylinder heads and tighten cap screws (A) in the sequence illustrated to 2.5 kg-m (18 ft-lb); then in the same sequence,
tighten to the final value of 5.0 kg-m (36 ft-lb)Tiehten can screw (B) to 1.0 kg-;(7 ftllb)9Release the ratchet (A) and press
the push rod (B) into the camshaft chain tensioner body; then install on the appropriate cylinder and tighten the cap screws