2006 Arctic Cat ATVs factory service and repair manual, Page 362Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 362

5Tighten the rear bracket to frame bolts (from step 3) securely; then install the front and rear through-bolt nuts and tighten
evenly tighten all the exhaust pipe retainer nuts to specifications 10Remove the tape or caps from the intake hoses checking
for any dirt, hardware items, or liquids; then install the carburetors into the intake hoses and tighten the clamps securelyMake
sure the carburetors are securely seated by rocking side to side after installation 8Install all exhaust system heat shields
and tighten the mounting screws securely; then install two muffler mounts, hardware, and bolts and tighten securelyMake sure