2006 Arctic Cat ATVs factory service and repair manual, Page 386Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 386

INSTALLING 1Place the cooler into position in the frame 2Secure the cooler to the frame with the cap screws and grommetsEY
section3Remove the fan and fan shroud; then separate the oil cooler from the radiator 1Remove the input and output hoses
from the fittings on the cooler A CAUTION snillaae Elevate and secure the hoses to avoid oil 2Remove the cap screws securing
the oil cooler to the frameAccount for grommets INSTALLING 1Place the oil cooler into position on the radiator and secure
with the retainer brackets; then install the fan shroud and fan 2Install the radiator (see Radiator) in this section3Connect
the oil hoses to the oil cooler and tighten the clamps securely4Warm up the engine and check for leaks; then shut off the