2006 Arctic Cat ATVs factory service and repair manual, Page 403Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 403

1Set the meter selector to the OHMS position 2Connect the red tester lead to one black wire; then connect the black tester
of resistance, replace the switch Oil Temperature and Cooling Fan Switches 1 NOTE: This model has an oil temperature switch
and cooling fan switch Coolant Temperature and cooling Fan Switches 1Connect the meter leads (selector in the OHMS position)
to the switch contacts2Suspend the switch and thermometer in container of water; then heat the water1NOTE: Neither the switch
nor the thermometer should be allowed to touch the bottom of the container or inaccurate readings will occurUse wire holders
to suspend switch and thermometer 1Connect the meter leads (selector in the OHMS position) to the switch contacts2Suspend
the switch and thermometer in container of oil; then heat the oil1NOTE: Neither the switch nor the thermometer should be
allowed to touch the bottom of the container or inaccurate readings will occurUse wire holders to suspend switch and thermometer
Temperature1 Cooling Fan Switch TemperatureCooling Fan Switch r- Meter Leads Wire Holders Thermometer 733-5541 Page: 403