2006 Arctic Cat ATVs factory service and repair manual, Page 433Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 433

8Remove the tie rod cotter pins and discard the pins 11Pull the steering knuckle away from the axle taking care not to damage
for the lock nuts; then move the shocks aside and secure them with strap 10Remove the upper ball joint cap screws taking
care not to strip the threads on the ball joint shaft; then using rubber mallet, tap the end of the axle and free it from
the knuckle assembly 14Remove the upper A-arm lock nuts and cap screws; then remove the A-arms Page: 433 Arctic Cat ATV 2006