2006 Arctic Cat ATVs factory service and repair manual, Page 438Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 438

6On the 650 V-Twin, install the input shaft into the pinion housing; then secure in the bearing with circlip Disassembling
kg-m (25-31 ft-lb) 1 NOTE: This procedure can be performed on rear gear case 1Using T-40 torx wrenchremove the can screws
securing the pinion housingAccount for the coupler, fork, and spring 2Using T-40 torx wrench, remove the cap screws securing