2006 Arctic Cat ATVs factory service and repair manual, Page 446Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 446

1 NOTE: Prior to installing the seal, apply grease to the seal outside diameter 2Pour 275 ml (9.3 fl oz) of SAE SOW-90 hypoid
4Install the inner fender panels5Install the front axles (see Drive Axles in this section)6Secure the upper A-arms with cap
screws and lock nuts specification; to 1Align the splined input yoke with the front output splines; then place the differential
into position on the frame and install the cap screws, washers, and flex-lock nutsTighten to specificationsMake sure the