2006 Arctic Cat ATVs factory service and repair manual, Page 447Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 447

8Secure the tie rods with the lock nutsTighten to specifications; then install and spread the cotter pins 10Install the wheels
port stand to avoid injury 2Pump up the hand brake; then engage the brake lever lock 3Remove the wheel4Remove the cotter
pin securing the hex nut; then remove the hex nutRelease the brake lever lock 9Making sure that each caliper has the 0.76
mm (0.030 in spacer washers between the caliper and the knuckle, install the brake calipersSecure with the cap screws tightened