2006 Arctic Cat ATVs factory service and repair manual, Page 450Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 450

10Using Boot Clamp Pliers (pln 0444-120), secure both outside boot clamps 3Apply 80 grams (213 of contents) of grease from
correctly when the small end of the boot seats down into the recessed groove he bearing ring must go onto the shaft with
th side without splines facing toward the small clamp of the inner boot or severe damage will result 5Secure the bearing
ring with the circlip making sure the sharp side of the circlip faces away from the boot 2Using the boot clamp pliers, secure
the small clamp of the inner boot Page: 450 Arctic Cat ATV 2006 -All Models 6Making sure the marks made during disassembling