2006 Arctic Cat ATVs factory service and repair manual, Page 463Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 463

5Remove the hub assembly 6Remove the cotter pin and slotted nut securing the tie rod end to the knuckle; then remove the
knuckle when removing the cap screws or damage to the threads will occur CLEANING AND INSPECTING 1 NOTE: Whenever part is
worn excessively, cracked, or damaged in any way, replacement is necessary 8Tap the ball joints out of the knuckle; then
remove the knuckle9Remove the lower shock absorber eyelet from the upper A-arm 1Clean all A-arm components in parts-cleaning