2006 Arctic Cat ATVs factory service and repair manual, Page 464Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 464

3Inspect the A-arm for bends, cracks, and worn bushings4Inspect the ball joint mounting holes for cracks or damage5Inspect
step 2)Tighten the cap screws to specifications IDo not tighten the nut beyond the 4.8 kg-m (35 ft-lb) 1 A CAUTION 1specification
or the shock eyelet or mount WILL be 1 6Install the knuckle assembly onto the ball joints and secure with cap screwsTighten
to specifications 2Install the A-arm assemblies into the frame mounts and secure with the cap screwsOnly finger-tighten at
this time 3Route the brake hose through the upper A-arm shock absorber mount 7Install the tie rod end and secure with the