2006 Arctic Cat ATVs factory service and repair manual, Page 480Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 480

3Remove the front rack from the ATV CLEANING AND INSPECTING 1 NOTE: Whenever part is worn excessively, cracked, or damaged
to the fendersTighten all hardware securely Battery acid is harmful if it contacts eyes, skin, or clothingCare must be taken
whenever handling batterv 3Remove four reinstallable rivets securing the storage compartment to the body; then remove the
storage compartment and the steering post cover Front Bumper Assembly REMOVING 1Remove the two flange bolts and lock nuts
securing the upper bumper supports to the bumper 2Remove the through-bolt and lock nut securing the bumper to the frame;
then remove the bumper CLEANING AND INSPECTING 1 NOTE: Whenever part is worn excessively, cracked, or damaged in any way,
replacement is necessary 1Clean all bumper components with parts-cleaning solvent2Inspect all welds for cracking or bendingINSTALLING