2006 Arctic Cat ATVs factory service and repair manual, Page 488Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 488

2Remove the cap screws securing the foot pegs to the footrests; then remove the foot pegs and footwells Belly Panel REMOVING
or unusual bends3Inspect all tubing for cracks or unusual bends INSTALLING 1Remove the two exhaust springs at the mufflerlexhaust
pipe juncture 1Secure the footrests to the frame with four cap screws and two flange nuts; then tighten securely 2Place the
footwells onto the footrests; then put the foot pegs in position and secure with two cap screws 2Slide the muffler rearward
to clear the mounting lugs and remove the mufflerREMOVING MUFFLERV-Twin) 1Remove the cap screws securing the muffler to the
frame and account for all mounting hardware 2Loosen the clamp at the mufflerlexhaust pipe juncture; then remove the muffler3Install