2006 Arctic Cat ATVs factory service and repair manual, Page 493Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 493

2Inspect all wires for corroding, pinching, and cracking3Inspect the bulb for wattage, voltage, and proper operationINSTALLING
on the rear of seatThe seat should automatically lock into positionREMOVINGIINSTALLINGFISNP) REMOVING 1Unplug the three-prong
connector and free the taillight wiring harness from the frame2Remove the tom-head cap screws securing the taillight assembly
to the frameAccount for any washers3Remove the taillight assemblyINSPECTING 1 NOTE: Whenever part is worn excessively, cracked,
or damaged in any way, replacement is necessary 1To remove the seat, pull the seat lock lever backward (located under the
rear rack between the storage comoartment and the frame)Raise the rear of the seat and slide it rearward 2To lock the seat
into position, slide the front of the seat into the seat retainers and push down firmly on the rear of seatThe seat should
automatically lock into positionREMOVINGIINSTALLING (TRV) 1To remove the rear seat, pull the two latch handles to the rear