2006 Arctic Cat ATVs factory service and repair manual, Page 500Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 500

S Switch Gearshift Pedal (Manual Transmission) Do not attempt to either engage or disengage the front differential while
to disengage the front differential lock, rotate the handle fully clockwise to UNLOCK Drive Selector (FIS Models) ADJUSTING
CABLE The automatic drive selector allows the operator to operate in either 2-wheel drive (rear wheels) or 4-wheel drive
(all wheels)For normal riding on flat, dry, hard surfaces, 2-wheel drive should be sufficientIn situations of aggressive
trail conditions, 4-wheel drive would be the desired choiceTo either engage or disengage the front wheels, move the switch
to the 4WD position or to the 2WD position9-6 Page: 500 Arctic Cat ATV 2006 -All Models 1With the differential lock selector
in the UNLOCK position, slide the rubber protector sleeve (A) off the cable near the differential lock selector; then loosen
the jam nut (B) and turn the cable adjuster (C) to achieve 6.35 mm (0.250 in free-travel measured at the end of the differential