2006 Arctic Cat ATVs factory service and repair manual, Page 501Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 501

KEY 12345678910111213 2Select the 2WD position on the front drive selector switch; then turn the ignition switch to the ON
1Remove the E-clip securing the shift rod to the engine shift arm (TBXTRV400500650 HI)On the 650 V-Twin, remove two cap screws
securing the front and rear shift rods together 4Turn the ignition switch to the OFF positionTighten the jam nut securely;
then install the protector sleeve on the adjuster assembly Reverse Shift Lever EY 123456 Handle Clip Plate Nut Lever Spring
TBXTRV400500650+ f 2Remove two cap screws, two self-tapping screws, and three nylon ties securing the left-side splash panel
and remove the panel 13141516171819 Washer Nut Rod End Linkage Bushing Washer E-Ring 0739-70 3Remove the axle and nut securing