2006 Arctic Cat DVX 400 Service Manual, Page 6Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 6

7Tighten all nuts, bolts, cap screws, and screwsMake sure rivets holding components together are tightReplace all loose rivetsCare
the battery completely discharges 10Store the ATV indoors in level position 7Check the entire brake systems (fluid level,
pads, etc, all controls, headlights, taillight, brakelight, and headlight aim; adjust or replace as necessary8Tighten all
nuts, bolts, cap screws, and screws making sure all calibrated nuts, cap screws, and bolts are tightened to specifications9Check
tire pressureInflate to recommended pressure as necessary10Make sure the steering moves freely and does not bind11Check the
spark plugClean or replace as necessary12Follow the recommendations found in the prestart inspection13Inspect the drive chain
and sprocketsAdjust or replace as necessary ! CAUTION Avoid storing outside in direct sunlight and avoid using plastic cover
as moisture will collect on the ATV causing rusting Preparation After Storage Taking the ATV out of storage and correctly