2006 Arctic Cat DVX 400 Service Manual, Page 20Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 20

! CAUTION If the oil filter element is inserted backwards, engine damage will occur due to lack of oil flow 7Place the filter
into the oil level stick hole; then start the engine (while the ATV is outside on level ground) and allow it to idle for
few minutes10Turn the engine off and wait approximately one minuteCheck the oil level with the oil level stickThe oil level
should be between the upper and lower crosshatch marks on the level stickAdjust oil level as necessaryNOTE: The oil level
stick should not be threaded into the oil tank for checking purposes ATV2030 6Apply oil to new cover O-ring and check to
make sure it is positioned correctly in the coverWith the open end of the filter element directed toward the center of the
engine, slide the element into position ATV2020A KEY 12345678910Oil Pump Assy Driven Gear Pin Washer Circlip Cap Screw Rotor