2006 Arctic Cat DVX 400 Service Manual, Page 26Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 26

2Measure the thickness of each brake pad SP128 AF739DB 3If thickness of any brake pad is less than 2.0 mm (0.078 in, all
BInstall the new brake pads; then tighten the brake pad mounting pins and the brake caliper mounting cap screws to specifications
(see Section 10)NOTE: After replacing the brake pads, compress the brake lever several times to check for proper brake operation;
then check the brake fluid level CInstall the wheels and tighten to specifications (see Section 10) using crisscross pattern
NOTE: Do not compress the brake lever after the brake pads are removedNOTE: Inspect the brake pad mounting pins (2) for wearIf