2006 Arctic Cat DVX 400 Service Manual, Page 66Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 66

NOTE: Check to be sure that the gears all engage normally; then shift the transmission into neutral 7Verify that the two
shift forks into its respective gear or dog (1) (2) (3) as noted during disassemblingSP226 NOTE: Prior to joining crankcase
halves, turn the shift cam to ensure all gears shift properly Joining Crankcase Halves NOTE: Critical torque specifications
are located in Section 10 1Verify that the washer is on the reverse idler shaft; then apply Three Bond Sealant (pn 0636-070)
to the mating surfacesPlace the right-side half onto the left-side half 6Install the shift cam (4); then install the shift