2006 Arctic Cat DVX 400 Service Manual, Page 68Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 68

2Align the keyway with the key and install the rotorflywheel; then using an offset 27 mm wrench, hold the flywheel and tighten
drive gear (2)Install the key (3) and cam chain drive sprocket (4) 6Install the crank balancer driven gear (5) aligning the
timing marks (6); then holding the generator rotor with 27 mm offset wrench, tighten the crank balancer driven gear nut to
specifications 4Install the cam chain (1) onto the sprocket; then install the cam chain tensioner and tighten the mounting